22766-68-3|- Page 31 of 44 - Heterocyclic Building Blocks-Quinuclidine

A new synthetic route of Ethyl quinuclidine-4-carboxylate

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,22766-68-3,Ethyl quinuclidine-4-carboxylate,its application will become more common.

A common heterocyclic compound, 22766-68-3,Ethyl quinuclidine-4-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 22766-68-3

Example 33 Preparation of 1-azabicyclo[2.2.2]oct-4-yl(di-3-thienyl)methanol A solution of t-Butyl lithium (1.7M in pentanes, 5.8 mL, 9.86 mmol) was chilled to -78 C. under Ar. 3-Bromothiophene (0.46 mL, 4.90 mmol) dissolved in THF (4.0 mL) was slowly added to the reaction mixture over 6 min. The reaction was stirred for 30 min and then ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.3132 g, 1.71 mmol) in THF (4 mL) was added. The reaction was allowed to warm up from -78 C. to room temperature over 16 h. After 14 hours, the reaction was slowly quenched with water. EtOAc was added, causing a grey solid to crash out. The solid was filtered off to give the title compound (0.3375 g, 64.6%). EI-MS m/z 306(M+H)+ Rt (1.27 min).

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Some scientific research about Ethyl quinuclidine-4-carboxylate

22766-68-3 A common heterocyclic compound, 22766-68-3,Ethyl quinuclidine-4-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

1-azabicyclo[2.2.2]oct-4-yl[bis(4-methylphenyl)]methanol A solution of 4-methylphenylmagnesiumbromide (1.0 M in THF, 3.3 mL, 3.3 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1509 g, 0.823 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.2291 g, 86.6%). EI-MS m/z 322(M+H+) Rt (1.57 min).

Some scientific research about Ethyl quinuclidine-4-carboxylate

1-azabicyclo[2.2.2]oct-4-yl(di-2-naphthalenyl)methanol A solution of (2-naphthalenyl)magnesiumbromide (0.5 M in THF, 6.5 mL, 3.25 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1597 g, 0.871 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.265 g, 77.3%). EI-MS m/z 394(M+H+) Rt (1.90 min).

New downstream synthetic route of 22766-68-3

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Ethyl quinuclidine-4-carboxylate,22766-68-3,its application will become more common.

A solution of phenyllithium (1 .9 M in 70 cyclohexane/30 ether, 22.30 mL, 42.40 mmol) was cooled down to -30C under nitrogen. A solution of ethyl 1 -azabicyclo[2.2.2]octane-4-carboxylate (III, 2.0 g, 10.90 mmol) in THF (27.0 mL) was slowly added to the reaction mixture at -30C over 25 mins. The reaction mixture was allowed to warm up to room temperature over 16h. The reaction was quenched with water (10.0 mL) and then evaporated to dryness under vacuum. Water (40.0 mL) and ethyl acetate (40.0 mL) were added, causing a white solid to crash out. This solid was filtered off under vacuum, to give a white powder (2.46 g, 76.8%). 1 -azabicyclo[2.2.2]oct-4-yl(diphenyl)methanol (IV): ^H-NMR (300 MHz, CDC ) delta 7.54 – 7.51 (m, 3H), 7.33 – 7.20 (m, 6H), 2.85 – 2.80 (m, 6H), 1 .78 – 1.72 (m, 6H). MS (ESI) m/z calcd for C20H23NO: 293, found 294 [M + H]+.

Reference£º
Patent; HOVIONE SCIENTIA LIMITED; TURNER, Craig; LOURENCO, Nuno Torres; SOBRAL, Luis; ANTUNES, Rafael; SANTOS, Maria; ESPADINHA, Margarida; (35 pag.)WO2018/87561; (2018); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

The origin of a common compound about Ethyl quinuclidine-4-carboxylate

Some scientific research about Ethyl quinuclidine-4-carboxylate

In a 500 mL three-necked flask, phenyllithium (160 mL, lM in THF) was treated with nitrogen Was slowly added dropwise to a solution of compound 1-4 (6.8 g, 0.04momicron1) in tetrahydrofuran (120 mL) Control the temperature at -50 C and stir at room temperature overnight. Water (200 mL) was added to quench the reaction, Extracted with ethyl acetate (500 mL), the organic layer was washed with saturated brine, dried over sodium sulfate, The solvent was evaporated under reduced pressure to give 6.8 g of a brown viscous solid, Ethyl acetate: petroleum ether = 1: 2 (200 mL) was added and stirred at room temperature for 2 h, filtered, The filter cake was washed with petroleum ether and dried to give a 5.1g lime light gray solid.

Reference£º
Patent; Yifang Bio-technology (Shanghai) Co., Ltd.; Dai Xing; Jiang Yueheng; Wang Yaolin; (26 pag.)CN107200734; (2017); A;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

New downstream synthetic route of 22766-68-3

Some scientific research about Ethyl quinuclidine-4-carboxylate

To a solution of ethyl 1-aza-bicyclo[2.2.2]octane-4-carboxylate (PCT2005104745) (9.610 g, 52.44 mmol) in THF (480 ml) at -780C was added borane-THF complex (73.41 ml,73.41 mmol) and the resulting solution was stirred at this temperature for 3.5 h. The reaction was quenched with slow addition of H2O (50 ml), warmed to RT, and allowed to stir for 45 min. The solution was diluted with EtOAc (100 ml), washed with brine (15 ml), extracted with EtOAc (3 x 50 ml), dried (Na2SO4) and evaporated. The crude product was purified on a CombiFlash companion using 0-50% EtOAc in cyclohexane as eluent to give a bright yellow solid.Yield: 7.236 g (70%)1 H NMR (400 MHz, CDCI3) delta = 4.15 (q, 2H), 3.07 (t, 4H)1 1.96 (t, 4H), 1.26 (t, 3H) ppm.

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2009/60206; (2009); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

The origin of a common compound about 22766-68-3

Example 27 Preparation of 1-azabicyclo[2.2.2]oct-4-yl(di-2-thienyl)methanol A solution of 2-thienyllithium (1.0M in THF, 9.10 mL, 9.10 mmol) was chilled down to -30 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.4196 g, 2.289 mmol) in THF (8 mL) was slowly added to the reaction mixture over 20 min. The reaction was allowed to warm up to room temperature over 16 h. The reaction was quenched with water and then evaporated to dryness. H2O and DCM were added, causing a light brown solid to crash out. This solid was filtered off to give the title compound (0.4161 g, 59.5%). EI-MS m/z 306(M+H+) Rt (1.35 min).

Some scientific research about Ethyl quinuclidine-4-carboxylate

Step 1. A solution of 4-carbethoxyquinuclidine (10.92 g) in THF (155 mL) was treated at-780C with borane-THF (1.0 M, 77.5 mL). The resulting mixture was stirred at -78C for 4 h, then treated with water (50 mL), warmed to room temperature and stirred for an additional hour. The reaction mixture was diluted with ethyl acetate and the aqueous phase was separated and extracted with two further portions of ethyl acetate. The combined organic layers were washed with brine- (twice), dried (MgSO4), filtered and evaporated in vacuo. Purification by silica gel chromatography (eluting with cyclohexane-ethyl acetate [1 :0 to 1 :1]) gave 1-boranyl-1-aza-bicyclo[2.2.2]octane-4- carboxylic acid ethyl ester (7.12 g, 61%) as an off-white solid. 1H NMR (400 MHz, CDCI3) delta 4.16 (2H1 q, J = 6.9), 3.10-3.05 (6H1 m), 1.98-1.93 (6H, m), 1.26 (3H, t, J = 6.9).

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2008/99186; (2008); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider