Category: quinuclidine

A common heterocyclic compound, the quinuclidine compound, name is Ethyl quinuclidine-4-carboxylate,cas is 22766-68-3, mainly used in chemical industry, its synthesis route is as follows.

1-azabicyclo[2.2.2]oct-4-yl[bis(3-methylphenyl)]methanol A solution of 3-methylphenylmagnesiumbromide (1.0 M in THF, 3.3 mL, 3.3 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1484 g, 0.810 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.1806 g, 69.4%). EI-MS m/z 322(M+H+) Rt (1.54 min).

As the rapid development of chemical substances, we look forward to future research findings about 22766-68-3

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO2,mainly used in chemical industry, its synthesis route is as follows.

Step 4. Quinuclidin-4-ylcarbonyl chloride hydrochloride Quinuclidine-4-carboxylic acid hydrochloride (0.192 g, 0.001 mole) was suspended in dichloromethane (5 ml) and dimethylformamide (1 drop) and oxalyl chloride (0.436 ml. 0.635 g, 0.005 mole) were added. The resulting suspension was heated to reflux under an atmosphere of argon for six hours. Following concentration of the suspension in vacuo the residue was suspended in dichloromethane, concentrated in vacuo and finally dried in vacuo to give the title compound as a pale brown solid.

With the synthetic route has been constantly updated, we look forward to future research findings about Quinuclidine-4-carboxylic acid hydrochloride,belong quinuclidine compound

Reference£º
Patent; SmithKline Beecham p.l.c.; US6281226; (2001); B1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO60,mainly used in chemical industry, its synthesis route is as follows.

1-azabicyclo[2.2.2]oct-4-yl]bis(4-fluorophenyl)]methanol A solution of 4-fluorophenylmagnesiumbromide (1.0 M in THF, 4.4 mL, 4.4 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1973 g, 1.08 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.3152 g, 88.9%). EI-MS m/z 330(M+H+) Rt (1.65 min).

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl quinuclidine-4-carboxylate,belong quinuclidine compound

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Quinuclidine-4-carboxylic acid hydrochloride, cas is 40117-63-3, it is a common heterocyclic compound, the quinuclidine compound, its synthesis route is as follows.

To a stirred suspension of quinuclidine-4-carboxylic acid hydrochloride (5.5 g) in 30 mL of dry THF at 0 C. was added borane dimethyl sulfide complex (6.7 g, 3 eq.). The reaction mixture was stirred at room temperature for 1 hr and heated to reflux for 16 hr. It was then quenched with drop-wise addition of methanol (7 mL) at 0 C. The solvent was then removed under reduced pressure, and the crude product obtained was purified by column chromatography (Silica gel, 20% EA:Hexane) to afford the product quinuclidin-4-ylmethanol N-borane complex as a white solid (1.35 g, 30%).

As the rapid development of chemical substances, we look forward to future research findings about 40117-63-3

Reference£º
Patent; CoMentis, Inc.; BILCER, Geoffrey M.; NG, Raymond; (104 pag.)US2016/9706; (2016); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Quinuclidine-4-carboxylic acid hydrochloride, cas is 40117-63-3, it is a common heterocyclic compound, the quinuclidine compound, its synthesis route is as follows.

Preparation of 3-fluorobenzyl quinuclidine-4-carboxylate (compound 91)A mixture of quinuclidine-4-carboxylic acid hydrochloride (100 mg, 0.52 mmol) and thionyl chloride (500 mu, 6.85 mmol) was refluxed for 2 hours. The reaction was cooled at room temperature and the solvent was accurately removed. The residue was suspended in dry DCM and treated with (3-fluorophenyl)methanol (65.8 mg, 0.52 mmol). The reaction was stirred at room temperature for 24 hours. The solvent was evaporated, the residue was dissolved in water (1 ml), basified with NaHCO3 and extracted twice with EtOAc. The combined organic layers were dried over Na2SO4, filtered and evaporated to obtain 3-fluorobenzyl quinuclidine-4-carboxylate (41 mg, 29.8 % yield), which was used in the next step without any further purification.

As the rapid development of chemical substances, we look forward to future research findings about 40117-63-3

Reference£º
Patent; CHIESI FARMACEUTICI S.p.A.; AMARI, Gabriele; RICCABONI, Mauro; DE ZANI, Daniele; WO2012/146515; (2012); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,belong quinuclidine compound,the synthetic route is as follows.

Under the protection of nitrogen, a solution for dissolving the WD2 with the tetrahydrofuran is added into a 20-liter reaction kettle, the temperature is controlled to be below 40 C under stirring, and 3.8 liters of phenylmagnesium bromide reagent is added dropwise, and carrying out heating reflux reaction for 4 hours. The temperature is controlled to be controlled at 40 C under cooling and stirring, and 1.547 kg of ammonium chloride aqueous solution (25%) is added dropwise) after dropwise adding, adding about 74 kg of purified water, and standing for liquid separation after stirring, so as to obtain an organic phase; extracting the water phase by using 2-methyl tetrahydrofuran, the organic phase is combined with the organic phase, and the organic phase is washed with a 25% sodium chloride aqueous solution. A 1 m hydrochloric acid aqueous solution is added to the obtained organic phase to be about 140Kg, fully stirring, standing and separating liquid to obtain a water phase; dropwise adding a sodium hydroxide aqueous solution with the concentration of 4 m into the obtained hydrochloric acid salt water solution of the WD1 to adjust the pH value, and separating out solids. After dropping, stirring is continued for about 0.5 hour, and the mixture is filtered to obtain a filter cake; the filtrate is subjected to reduced pressure concentration until no large amount of distillate is discharged, and the filtrate is filtered to obtain a filter cake; combining the obtained filter cakes twice, and washing with purified water with the temperature of 25 +/-5 C, and then pulping is carried out by using purified water at 25 +/-5 C for about 2.61 kg. The filter cake is firstly washed with purified water at 25 +/-5 C, and then is dried to obtain WD1:

Big data shows that 40117-63-3 is playing an increasingly important role.

Reference£º
Patent; Sichuan Hai Sike Pharmaceutical Co., Ltd.; Yi Shixu; Fu Li; (6 pag.)CN106810546; (2017); A;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

As a common heterocyclic compound, it belong quinuclidine compound,Ethyl quinuclidine-4-carboxylate,22766-68-3,Molecular formula: C10H17NO2,mainly used in chemical industry, its synthesis route is as follows.

In a 500 mL three-necked flask, phenyllithium (160 mL, lM in THF) was treated with nitrogen Was slowly added dropwise to a solution of compound 1-4 (6.8 g, 0.04momicron1) in tetrahydrofuran (120 mL) Control the temperature at -50 C and stir at room temperature overnight. Water (200 mL) was added to quench the reaction, Extracted with ethyl acetate (500 mL), the organic layer was washed with saturated brine, dried over sodium sulfate, The solvent was evaporated under reduced pressure to give 6.8 g of a brown viscous solid, Ethyl acetate: petroleum ether = 1: 2 (200 mL) was added and stirred at room temperature for 2 h, filtered, The filter cake was washed with petroleum ether and dried to give a 5.1g lime light gray solid.

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl quinuclidine-4-carboxylate,belong quinuclidine compound

Reference£º
Patent; Yifang Bio-technology (Shanghai) Co., Ltd.; Dai Xing; Jiang Yueheng; Wang Yaolin; (26 pag.)CN107200734; (2017); A;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Ethyl quinuclidine-4-carboxylate,22766-68-3,belong quinuclidine compound,the synthetic route is as follows.

Example 33 Preparation of 1-azabicyclo[2.2.2]oct-4-yl(di-3-thienyl)methanol A solution of t-Butyl lithium (1.7M in pentanes, 5.8 mL, 9.86 mmol) was chilled to -78 C. under Ar. 3-Bromothiophene (0.46 mL, 4.90 mmol) dissolved in THF (4.0 mL) was slowly added to the reaction mixture over 6 min. The reaction was stirred for 30 min and then ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.3132 g, 1.71 mmol) in THF (4 mL) was added. The reaction was allowed to warm up from -78 C. to room temperature over 16 h. After 14 hours, the reaction was slowly quenched with water. EtOAc was added, causing a grey solid to crash out. The solid was filtered off to give the title compound (0.3375 g, 64.6%). EI-MS m/z 306(M+H)+ Rt (1.27 min).

Big data shows that 22766-68-3 is playing an increasingly important role.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Quinuclidine-4-carbonitrile,26458-78-6,belong quinuclidine compound,the synthetic route is as follows.

Quinuclidine-4-carbonitrile (4 g, 29.4 mmol) was treated with 30 mL of 6 N aqueous HCl solution and stirred under reflux for 16 hr. The reaction mixture was cooled and evaporated to dryness under reduced pressure. The solid obtained was triturated with 20% ether-hexane to afford the HCl salt of quinuclidine-4-carboxylic acid (5.5 g, quantitative).

Big data shows that 26458-78-6 is playing an increasingly important role.

Reference£º
Patent; CoMentis, Inc.; BILCER, Geoffrey M.; NG, Raymond; (104 pag.)US2016/9706; (2016); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

As a common heterocyclic compound, it belong quinuclidine compound,Ethyl quinuclidine-4-carboxylate,22766-68-3,Molecular formula: C10H17NO2,mainly used in chemical industry, its synthesis route is as follows.

1-azabicyclo[2.2.2]oct-4-yl[bis(3-methylphenyl)]methanol A solution of 3-methylphenylmagnesiumbromide (1.0 M in THF, 3.3 mL, 3.3 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1484 g, 0.810 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.1806 g, 69.4%). EI-MS m/z 322(M+H+) Rt (1.54 min).

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl quinuclidine-4-carboxylate,belong quinuclidine compound

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider